Exhaust & Emissions
How your exhaust cleans and quiets the gases from your engine.
How it works
The exhaust carries burned gases from the engine, cleans them, quiets them, and releases them behind the car. The exhaust manifold collects gases from each cylinder; the catalytic converter turns harmful gases into less harmful ones; oxygen sensors before and after it check how well it's working; and the muffler and resonator cut the noise.
Why it wears
Road salt rusts pipes, clamps and hangers. Short trips leave water inside the exhaust that rots it from the inside. Misfires or burning oil overheat and clog the catalytic converter.
Warning signs
When to service
Have the exhaust inspected yearly, especially after winter. Fix misfires and check engine lights promptly to protect the catalytic converter.
Go deeper: the technical details
- Three-way catalyst
- Platinum, palladium and rhodium coat a honeycomb inside the converter. They turn carbon monoxide into carbon dioxide, unburned fuel into carbon dioxide and water, and nitrogen oxides into nitrogen. It works best above about 400 °C.
- Oxygen sensors
- The upstream sensor guides fuel control. The downstream sensor should read fairly steady if the converter is storing oxygen properly; if it starts mirroring the upstream sensor, the computer sets a catalyst efficiency code (P0420).
- EGR
- Exhaust gas recirculation sends a little exhaust back into the intake to lower combustion temperature, which cuts nitrogen oxides. Clogged EGR passages cause rough running and knock.
- Diesel systems
- Diesels add a particulate filter (DPF) that traps soot and burns it off, and many use DEF fluid sprayed into the exhaust to break down nitrogen oxides.
General information for typical vehicles. Your owner's manual may call for different intervals. See also our maintenance schedule and warning lights guide.
Need a hand with it?
Louder exhaust, a rattle underneath or a check engine light? Have us inspect it.