Mon–Fri 9 AM – 5 PM  ·  Sat 9 AM – 1 PM (Walk-Ins)  ·  9129 111 Ave NW, Edmonton Call 780-471-2100  |  Text 780-471-2105
Home  ›  How Your Car Works  ›  Ignition & Timing

Ignition & Timing

How your engine fires each cylinder at exactly the right moment.

How it works

The ignition system fires each spark plug at exactly the right moment. Modern cars use a coil on each plug, turning the battery's 12 volts into tens of thousands of volts to jump the plug's gap. The timing belt or chain keeps the crankshaft and camshafts turning in perfect sync, so the valves open and close at the right time for each piston.

Why it wears

Spark plug electrodes slowly erode, widening the gap. Coils fail from heat and age. Timing belts are rubber and stretch and crack with age; chains stretch as their pins wear, especially when oil changes are missed.

Warning signs

Watch for: Misfires, rough idle, hard starts, a flashing check engine light, loss of power, worse fuel economy, or a rattle at startup (stretched timing chain). A broken timing belt stops the engine instantly.

When to service

Replace spark plugs on the maker's schedule, often about 100,000 km for iridium plugs. Replace a timing belt on schedule, usually around 100,000–160,000 km or 7–10 years, along with the water pump if it's driven by the belt. Timing chains are meant to last the life of the engine, if the oil is changed on time.

Go deeper: the technical details
Ignition coils
A coil is a transformer. Cutting current through the primary winding collapses its magnetic field, inducing 20,000–40,000 volts or more in the secondary winding to fire the plug.
Spark timing
The spark fires before the piston reaches the top, measured in degrees of crankshaft rotation, so peak pressure arrives just after top dead centre. The computer advances or retards timing based on load, speed and knock.
Plug heat range
A plug must run hot enough to burn off deposits but cool enough to avoid pre-ignition. Iridium and platinum tips resist erosion and last far longer than copper.
Interference engines
In many engines the valves and pistons share the same space at different times. If the timing belt breaks, they collide, bending valves and often requiring major repair. That's why the replacement schedule matters.
Variable valve timing
Oil-pressure-driven phasers shift camshaft timing as the engine runs, improving power and economy. Low or dirty oil causes VVT codes and rough running.

General information for typical vehicles. Your owner's manual may call for different intervals. See also our maintenance schedule and warning lights guide.

Need a hand with it?

Misfires, rough idle or a rattle at startup? Let us check your ignition and timing.

Book Call Text Directions